Видео

I have the same battery. Most of the cells on it(probably 4 or 5 of them) are at the lower level line. Does that mean I need to refill it? And do I fill it with acid or distilled water? Ive been having a little bit of battery trouble but it still works ok after a charge.

FFWD 8 years from when this video was made . These aren’t cheap anymore. Cost today around 180/200$ per tire

Thanks so much for the information!

sweet helmet brah

I made the mistake of rushing the process now 4 short rides later (two night rides) my battery is shot and i am buying a new one today.

Is the 'knocking' sound under acceleration common? Mine does it and one other Sportsman 500 sounds the same. Has done this since I got it 10 years ago. I had a Kawasaki 300 years ago that made the same noise when on the gas.

At 37 seconds, what is the copper/brown looking part that he grazes with the wrench, on the way into the bolt? I obtained a used 2000 rancher, and it has that part, but someone seems to have "melted" a small hole near the bottom and inserted a gas overfill tube inside. 🤷

Thank you for this video and for telling me where the filter is! I couldnt find it. You helped me a lot <3

Hardest metal drum song to a mechanic video ever!!

Well done thank you

Hello, Are you interested in testing our products? We would like to invite you to test the Phone Holder for your 450 Rhino

How much torque on them nuts

Got a question. I had to replace front wheel bearings in the Brake Drum on a 94 Trx300 2x4. Should I grease the axle a little upon reinstalling the drum or is it ok just like it is?

What year is that bike

I'm amazed at how many people think 8' x 8' = 8 sqft! That's 64 folks. If you have an 8' wall that's 10' long, you need EIGHTY sqft of coverage.

How to drain the gas tank on your Honda atv electric shift

I have one of these on my Honda Rancher, yes, it’s expensive and it doesn’t do all that much, but I love what it does to the sound. Especially on a single cylinder engine, it definitely smooths out the puttering sound. I wish the manufacturers would give consumers a choice, someone like me, who uses it as a utility vehicle, I would like to have the bike as quiet as possible, others who are mud bogging etc. might want a more aggressive sound, let us have the choice. Thanks for the side by side comparison.

👍

I had a 2001 300 4x4. It was a great four-wheeler. And it had high low range. It would do the work that the 400 would do. Just a tad slower.

I didn’t know that there was a Rhino 450, i only knew the 660 / 700 ...

was curious if these were any good thanks for doing the review.

Thanks!

Recon is better no hussle.

Very informative video but the happy music in in the tutorial should be something much more metal. The rage that filled me when I got to the brake drum was overwhelming. Beating on it with a 5 lb hammer and torching it while soaking it with penetration oil. The spline not giving up and my hands black while mosquitoes are eating me alive. Please let me know if there's a step I missed while trying to take the drum off. It's an 1988 Fourtrax😅

Excellent!

im doing a outdoor patio bbq and grill area. thinking of using this for the face of the bar and counter area. that really looks nice. .

Nice video. Can you please update on what you think of it now? Did you have any heat problems? Loss of HP?

What diffence with filter code 5gh-13440-80 and 5gh-13440-60 Does he settle in both anyway? for kodiak 450 2003

How do you change the break cylinders I can’t find a video for the life of me

2024..still being referenced. You the man!

I had a old belt on mine never heard any squealing i put a brand new belt on and now it squeals alot any tips or reason why its doing that?? Please some one respond

My book says Valve Clearance (when cold) Exhaust: 0.20 ∼ 0.25 mm (0.0079 ∼ 0.0098 in.) Inlet: 0.10 ∼ 0.15 mm (0.0039 ∼ 0.0059 in.) your valves are super tight 😳😳😳😳 well ima try it on mine and lean toward the tight side

Which way does the oio filter cover go back on ? Where the filter dowel rests on the cover there is a slot , does it go down or up?

What year everybody's saying filter is too small

Great video thank you. Can they handle two people on board?.

Nice

Really cool and informative video, looks like these are about 7K dollar in base trim. Hard to decide what to get there are so many choices out there today.

i have a 2017 rancher 420 and it's flashing a dash after a very short ride. will it be rideable after it sits for a bit?

Wish my top pin came out that easily 😂

I feel like this explained NOTHING.

Those things should be mandatory for the peace of everyone else.

Will this work for an 87 too?

Great job 👍

Great video!! Thank you. Short sweet and to the point

Canadian engineering. The Rugged Universal Power Steering system will work correctly for 1 year and then it’s designed to break down progressively. Just watch the front tire uneven wear. My defender will go off the road every 40yds. I took it to the extreme power sports dealership where I bought it to have the alignment realigned 3 times, failing each time. Strike three - then Travis the service manager stated, “there is nothing we can do because the computer sets the alignments”. That’s nonsense and we all know this because you don’t have to be a service manager to realize you just have to install a new steering gear unit trashing the old because Canadian engineering in China by Mexicans sux. Never again. Can Am makes toys for boys, not tools for utility. What a mistake. Buy a tractor if you need to do real work. Make sure it’s not engineered in Canada, assembled in China .

Would this be the cause of oil coming out of over flow from pressure build up?

Thanks for this video. I just broke the gear shift lever this afternoon, because the gator is extremely difficult to shift. The lever I can get locally. I'm wondering what lube I want to use on the clutch, and also on the "linkage" between the lever and the clutch housing. Any suggestions? Thanks again for posting, and thumbs way up.

2000? Mine was closer to 200 bucks. Not nearly as nice and needs some work but I would never and spend that much on one of these. For that price there are much better wheelers out there.

having the HARDEST time getting the oil plug back in the spring and screen are a pain.

Awesome video man ! Straight to the point no bs, saved me from digging for the manual.